They will then appear in blue and green respectively.Īll the slices must have the same number of control points.
When designing the slices, it is recommended to set the point type of the rail point as, and the apex point as. The angular tangents are more appropriate for the rail point of the slices, the vertical tangents for the apex of the slices, and the horizontal ones for the widest point of the outline, the zero point of the bottom, or the highest point of the thickness. The properties of the selected control point are shown in the “Control point properties” box.įive kind of tangents exist: continuous tangents, angular tangents, vertical tangents, horizontal tangents, and continuous tangents with fixed angle. You can also add a control point with a double left click at the position you want, or with a right click, selecting “Control point”, “Add new point”. You can delete a control point pressing the button “Suppr” of the keyboard, or with a right click, selecting “Control point”, “Delete”. You can move the control points with the mouse, or with the arrows of the keyboard. To modify the design of the curves, left click on the control points. The dimensions of the board appear in the Master Scale box. You can visualize three components of the board at the same time, choosing between Outline, Profile, Thickness, or Slices in the toolbar. The starting model appears in the Design mode. Uncheck it if they are measured along a straight line. Check the box “Stringer measurement” if these dimensions are measured along the stringer.
Input length, width, thickness, and tail/nose rocker. Check the box “symmetric nose/tail” for a twin-tip board. Choose the dimensions’ unit: centimeters, millimeters, inches or fractional inches. Enter the name of the model you are going to design, and your name as a shaper. Choose the model to start from between the examples proposed in C:\Shape3dmodels. Go to the menu "File", then "New", or press the button “New”.
0 kommentar(er)
